Electric Load Sensor: Service and Repair
ELD Replacement1. Make sure you have the anti-theft code for the audio system.
2. Disconnect the negative cable from the battery, then disconnect the positive cable.
3. Remove the two positive (+) terminals (A).
4. Remove the under-hood fuse/relay box from the bracket.
5. Remove the under-hood fuse/relay box lower cover (B) from the fuse/relay box.
6. Remove the No. 20 IG1 (50 A) fuse (A) and the No. 19 BATTERY (100 A) fuse (B).
7. Disconnect the ELD 3P connector (A), then remove the ELD (B).
8. Install the parts in the reverse order of removal.
9. Enter the anti-theft code for the audio system.
10. Set the clock.