Air Bag Deactivation Indicator: Testing and Inspection

Passenger's Airbag Cutoff Indicator Test

1. Remove the center panel.
2. Disconnect the 4P connector (A) from the passenger's airbag cutoff indicator (B).






3. Push out the passenger's airbag cutoff indicator from behind the center panel (C).
4. Using the diode setting on a DVOM, check for current flow in both directions between the passenger's cutoff indicator illumination diode terminals No.1 and No.4. If there is no current, replace the passenger's cutoff indicator.
5. Reinstall the parts in the reverse order of removal.