Ignition Switch: Testing and Inspection
Ignition SwitchTest
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.
1. Make sure you have the anti-theft codes for the audio system.
2. Remove the dashboard lower cover.
3. Disconnect connector A (5P) from the under-dash fuse/relay box.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity checks do not agree with the table, replace the steering lock (ignition) switch.
6. After reconnecting the battery, enter the anti-theft codes for the audio system, then set the clock.