Removal and Replacement

Alternator Removal and Installation

REMOVAL
1. Make sure you have the anti-theft code for the audio system.
2. Disconnect the negative cable from the battery.
3. Remove the drive belt.
4. Remove the auto-tensioner.
5. Disconnect the alternator connector (A), BLK wire (B), and harness clamp (C) from the alternator.






6. Remove the positive crankcase ventilation (PCV) valve.
7. Remove the three bolts securing the alternator.






INSTALLATION

1. Install the alternator.






2. Install the positive crankcase ventilation (PCV) valve.
3. Connect the alternator connector (A), BLK wire (B), and harness clamp (C) to the alternator. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.






4. Install the auto-tensioner.
5. Install the drive belt.
6. Connect the negative cable to the battery.
7. Enter the anti-theft code for the audio system.
8. Do the power window control unit reset procedure.
9. Set the clock.