Differential Installation

Differential Installation
1. Install the rear differential mount assembly A to the rear differential assembly (B).





2. Jack up the rear differential.
3. Install the new set rings (B) onto the driveshafts, then insert the driveshafts into the rear differential (C).





4. Lift the rear differential up into position, then push on both driveshafts; to lock the set rings into place. Connect the breather tube (A).
5. Install the plates and the rear differential mount assembly mounting bolts.





6. Install the right and left rear differential mount brackets B and rear differential damper (A) (M/T model).





7. Connect the No. 2 propeller shaft onto the rear differential by aligning the reference mark.
8. Install the tail pipe (A).





9. Refill the rear differential with the recommended fluid.
10. Test-drive the vehicle.