Carrier Bearing Replacement

Carrier Bearing Replacement

Special Tools Required
Driver handle 07746-0030100

1. Check the carrier bearings for wear and rough rotation. If they rotate smoothly and their rollers show no signs of wear, the bearings are OK.
2. Remove the carrier bearings (A) with a commercially available bearing puller (B).





3. Install the new bearings (A) with the driver handle (B) and a press. Press on each bearing until it bottoms. There should be no clearance between the bearings and the carrier.

NOTE: Place the seal (C) part of the bearing toward the outside of the differential, then install it.