Transfer Housing Tapered Roller Bearing Outer Race Replacement
Transfer Housing Tapered Roller Bearing Outer Race ReplacementSpecial Tools Required
^ Driver 07749-0010000
^ Oil seal driver attachment 07947-SD90101
^ Bearing installer attachment 07KAF-PS30120
^ Bearing installer attachment 07LAF-PZ70110
^ Installer shaft, 14 x 165 mm 07JAF-SJ80110
^ Installer nut, 14 mm 07JAF-SJ80120
NOTE: Replace the bearing with a new one whenever the outer race is replaced.
1. Remove the 57 mm bearing outer race (A), 62 mm bearing outer race (B), and 50.3 mm bearing outer race (C) from the transfer housing by heating the transfer housing to about 212° F (100° C) with a heat gun. Do not heat the housing more than 212° F (100° C). Some 57 mm outer races are press-fitted in the transfer housing.
Bearing Outer Race Locations
2. Install the 57 mm bearing outer race (A) in the housing (B) with the driver and oil seal driver attachment.
3. Install the 62 mm bearing outer race and 50.3 mm bearing outer race in the housing with the installer nuts, installer shaft, and bearing installer attachments.
