Transfer Output Shaft Bearing Removal/Installation
Transfer Output Shaft Bearing Removal/installationSpecial Tools Required
^ Driver, 40 mm I.D. 07746-0030100
^ Attachment, 35 mm I.D. 07746-0030400
1. Remove the tapered roller bearing (A) from the transfer output shaft (B) with a bearing separator (C) and a press. Place a shaft protector (D) between the transfer output shaft and the press to prevent damaging the transfer output shaft.
2. Install the 35 mm thrust shim (A) on the transfer output shaft (B)
3. Install the tapered roller bearing (C) on the transfer output shaft with the 40 mm driver, 35 mm attachment, and a press.