Transfer Holder Disassembly

Transfer Holder Disassembly

1. Cut the locking tab of the transfer shaft locknut using a chisel. Keep all of the chiseled particles out of the transfer shaft assembly.





2. Hold the transfer shaft assembly (A) with a 14 mm hex wrench (B) clamped in a bench vise, then loosen the transfer shaft locknut.





3. Remove the transfer shaft locknut (A), conical spring washer (B), 57 mm tapered roller bearing (C), 25 mm thrust shim (D), transfer collar (E), transfer drive gear (F), and transfer shaft assembly (G) from the transfer holder (H).