Transfer Holder Tapered Roller Bearing Outer Race Removal/Installation
Transfer Holder Tapered Roller Bearing Outer Race Removal/InstallationSpecial Tools Required
^ Attachment 72 x 75 mm 07746-0010600
^ Driver 07749-0010000
NOTE: Coat all parts with manual transmission fluid (MTF) during reassembly.
1. Remove the 76 mm tapered roller bearing outer race (A) and 76 mm thrust shim (B) from the transfer holder.
2. Install the 76 mm thrust shim (A) in the transfer holder.
3. Install the 76 mm tapered roller bearing outer race (B) using the 72 x 75 mm attachment (C), driver (D), and a press in the direction shown.