Transfer Output Shaft Bearing Removal/Installation
Transfer Output Shaft Bearing Removal/installationSpecial Tools Required
^ Driver handle 07746-0030100
^ Attachment, 35 mm I.D. 07746-0030400
NOTE: Coat all parts with manual transmission fluid (MTF) during reassembly.
1. Remove the 62 mm tapered roller bearing (A) from the transfer output shaft (B) using a commercially available bearing separator (C), an adapter (D), and a press.
2. Install the new 62 mm tapered roller bearing (A) on the transfer output shaft (B) using the driver handle (C), 35 mm I.D. attachment (D), and a press.
