Advanced Diagnostics

DTC P0351: No. 1 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)
DTC P0352: No. 2 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)
DTC P0353: No. 3 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)
DTC P0354: No. 4 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)
DTC P0355: No. 5 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)
DTC P0356: No. 6 Cylinder Ignition Coil Circuit Malfunction (Engine Type: J35A7)






General Description
The igniter is triggered at the optimum time by the powertrain control module (PCM). The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time or more, the PCM detects a malfunction and a DTC is stored.

Monitor Execution, Sequence, Duration, DTC Type, OBD Status






Enable Conditions






Malfunction Threshold
The return signal does not change for at least 5 seconds when the ignition coil is triggered.

Diagnosis Details

Conditions for illuminating the MIL
When a malfunction is detected, the MIL comes on and the DTC and the freeze frame data are stored in the PCM memory.

Conditions for clearing the MIL
The MIL will be cleared if the malfunction does not recur during three consecutive trips in which the diagnostic runs. The MIL, the DTC, and the freeze frame data can be cleared by using the scan tool Clear command or by disconnecting the battery.