Vehicle Icon Moves By Itself
Vehicle icon moves by itselfNOTE:
- Check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have the navigation system anti-theft codes.
- After troubleshooting, enter the anti-theft code, and initialize the navigation system.
1. Start the engine.
2. From the main menu, select places, then select any destination, and begin the trip.
3. With the vehicle parked, watch the vehicle icon on the display.
Does the vehicle position icon move by itself?
YES - Go to step 4.
NO - The system is OK at this time.
4. Go into the Diagnostic mode and select Demo Mode, under Functional Setup.
Is Demo Mode set to ON?
YES - Set the Demo mode to OFF.
NO - Replace the navigation unit.