Operation CHARM: Car repair manuals for everyone.

Driver's Dashboard Lower Cover Removal/Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Take care not to scratch the dashboard and related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Remove the dashboard center lower cover.
2. Remove the driver's dashboard lower cover (A).
1. Remove the screw from the driver's dashboard lower cover.
2. Pull out the bottom of the driver's dashboard lower cover to release the clips and hooks (B).
3. If equipped, disconnect the in-car temperature sensor connector (C) and the air hose (D).






3. Install the cover in the reverse order of removal, and note these items:
- Make sure that each connector is plugged in properly, and the air hose is connected properly.
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.