Door Lock Actuator Test
Door Lock Actuator TestDriver's/Front passenger's door
1. Remove the door panel.
2. Disconnect the 2P connector from the actuator.
NOTE: The illustration shows the driver's door.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator does not operate as specified, replace it.
Sliding door
1. Remove the sliding door panel.
2. Disconnect the 2P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator does not operate as specified, replace it.