J35A6 Engine

Cylinder Head Cover Removal

1. Remove the intake manifold.
2. Remove the six ignition coils.
3. Remove the dipstick.
4. Remove the two bolts (A) securing the harness holder, and remove the harness clamp (B).





5. Disconnect the three injector connectors from the injectors on the rear side cylinder head.
6. Remove the drive belt.
7. Remove the power steering pump with the hoses connected.
8. Remove the harness holder mounting bolts (A), and the engine ground cable bolt (B).





9. Remove the engine ground cable (C) and the breather hose (D).
10. Remove the harness (E) from the rear upper cover.
11. Remove the cylinder head cover.