Power Seats

Power Seat Adjustment Switch Test/Replacement

Driver's seat without DPMS

NOTE: For DPMS power seat adjustment switch test/replacement, refer to Memory Positioning Systems.

1. Remove the power seat adjustment switch knobs (A) and the recline cover from the driver's power seat, then remove the two screws and the power seat adjustment switch (B).






2. Disconnect the 12P connector from the power seat adjustment switch.
3. Reinstall the adjustment switch knobs to the switch.
4. Check for continuity between the terminals in each switch position according to the table.






5. If the continuity is not as specified, replace the switch.

Front Passenger's Seat

1. Remove the power seat adjustment switch knobs (A) and the recline cover from the passenger's seat.






2. Remove the screws and the power seat adjustment switch (B).
3. Disconnect the 12P connector from the power seat adjustment switch.
4. Reinstall the switch knobs to the switch.
5. Check for continuity between the terminals in each switch position according to the table.






6. If the continuity is not as specified, replace the switch.