Connecting Rod, Engine
Connecting RodTightening Torque 20 N-m (2.0 kgf-m, 15 lbf-ft) + 90°
Mark the connecting rod (A) and the bolt head (B) as shown.
Tighten the bolt until the mark on the bolt head lines up with the mark on the connecting rod (turn the bolt 90°).
Each connecting rod falls into one of four tolerance ranges (from 0 to 0.024 mm (0.0009 in.), in 0.006 mm (0.0002 in.) increments) depending on the size of its big end bore.
Normal Bore Size 58.0 mm (2.28 in.)
