Shift Interlock Switch: Service and Repair
Park Pin Switch Replacement1. Remove the shift lever assembly.
2. Remove the tape from the harness.
3. Remove the harness wire tie.
4. Remove the A/T gear position indicator panel, and move it up.
5. Remove the park pin switch (A).
6. Install a new park pin switch, and install the A/T gear position indicator panel.
7. Route the harnesses along the harness guide (A), and tie the harnesses and guide with a new wire tie (B).
8. Tie the harnesses together into bundles with new tape (A) in two places.
9. Tie the harnesses and the harness clamp (B) together into a bundle with tape (C).
10. Install the shift lever assembly.