Traction Control Switch: Testing and Inspection

VSA OFF Switch Test

1. Make sure the ignition switch OFF.
2. Remove the switch panel (A).





3. Disconnect the VSA OFF switch 13P connector (B).
4. Remove the VSA OFF switch (C) from the switch panel.
5. Check for continuity between the VSA OFF switch 13P connector terminals No. 11 and No. 12. There should be continuity when the switch is pressed, and no continuity when the switch is released.





6. Check for continuity between the VSA OFF switch 13P connector terminals No. 1 and No. 5. There should be continuity at all times.