DTC 65

DTC 65: Brake Fluid Level

1. Check the brake fluid level.

Is the level correct?

YES - Go to step 2.

NO - Check for leaks in the brake system. If no leaks are found, inspect the brake lining and replace any worn brake pads.

2. Disconnect the gauge control module connector B (36P), and brake fluid level switch connector.
3. Check for continuity between terminal No. 4 of the gauge control module connector B (36P) and body ground.





Is there continuity?

YES - Repair short to body ground in the wire between the gauge control module connector B and the brake fluid level switch.

NO - Go to step 4.

4. Check the brake fluid level switch.

Is the switch OK?

YES - Do the troubleshooting for the gauge control module.

NO - Replace the brake fluid level switch.