DVD-ROM Replacement

DVD-ROM Replacement

NOTE:
- When the DVD-ROM is re-inserted or replaced, a map match must be done.
- Make sure that the correct color DVD is installed (white).
- Go on-line and check for any service bulletins or other service information regarding the navigation system.

1. Slide the passenger's seat (A) to the rear.






2. Turn the ignition switch ON (II).
3. Open the front cover (B) of the navigation unit.
4. Press the EJECT button (C).
5. Remove the DVD-ROM.
6. Insert the new DVD-ROM with the white label facing up.
7. Close the front cover.
- Do not turn the ignition switch OFF until data is down loaded to navigation unit.

NOTE: After servicing, the front cover must be closed. If you start up the navigation system with the front cover open, the display will indicate. "Navigation unit door is open or No DVD Disk installed. Please check system".

8. Do the Map Matching procedure after servicing.