Front Individual Map Light Test/Replacement
Front Individual Map Light Test/ReplacementWith moonroof
1. Turn the light switch OFF.
2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the four mounting screws.
4. Disconnect the 3P and 10P connectors (B) from the housing (C).
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.
Without moonroof
1. Turn the light switch OFF.
2. Carefully pry off the lenses (A) with a small screwdriver.
3. Remove the four mounting screws.
4. Disconnect the 3P connector (B) from the roof console (C).
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.