Center Console
Center Console Disassembly/ReassemblySpecial Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the console and related parts.
1. Remove the center console.
2. Remove the console armrest .
3. While pushing the beverage holder lever (A), slide the beverage holder (B) forward, and disengage the beverage holder stops (C) to remove the beverage holder.
4. Release the console lid (A).
5. Using a T20 Torx bit, remove the screws, then separate the console (A) and console frame (B).
6. Using a T20 Torx bit, remove the screws, then separate the console box (A) and the console frame (B). Disconnect the light bulb socket (C), and detach the connector clip (D), then remove the light (E) from the console box.
7. Remove the console lid bumpers (F). Release the hooks (G), then remove the console lid guides (H) from the console frame.
8. Reassemble the console in the reverse order of disassembly, and make sure the light bulb socket is plugged in properly.