Front Seat Cushion Cover
Front Seat Cushion Cover ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to tear the seams of damage the seat covers.
- Put on gloves to protect your hands.
1. Remove the front seat.
2. Remove the seat-back.
3. From under the seat cushion, disconnect the seat cushion heater connector, and detach the seat cushion heater connector clip on the manual seat.
4. Release the hook strips (A) from both sides of the seat cushion.
5. Release the hooks (A) from under the seat cushion (B).
6. Remove the silencer (A) and seat cushion pad (B) from the seat cushion frame (C).
7. Release the clips (A) from under the seat cushion (B).
8. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover.
9. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hook strips.
- Using commercially available upholstery ring pliers (A), replace all of the clips you removed with new ones (B).