Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Dashboard Center Lower Cover
Dashboard Center Lower Cover Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
- Take care not to scratch the dashboard and related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. From under the dash, detach the clips, release the guide (A), then remove the driver's console side trim (B) and passenger's console side trim (C).
2. Open the center lower pocket (A), and remove it by pulling the bottom of it up.
3. Remove the dashboard center lower cover (A).
1. Remove the screws (B).
2. Pull out the cover to release the clips (C, D).
3. Disconnect the seat heater connectors (E) (for some models) and accessory socket connectors (F).
4. Install the cover in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Make sure the each connector is plugged in properly.
- Push the clips into place securely.