Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Driver's Dashboard Lower Cover
Driver's Dashboard Lower Cover Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.
- Put on gloves to protect your hands.
1. Open the front door, and remove the driver's dashboard side cover (A).
1. Pull out the front door opening trim (B), as necessary.
2. Pry up on the lower edge of the dashboard side cover at the notch (C) to release the clip (D).
3. Gently pull out along the edge to release the clips (E).
2. Remove the driver's dashboard lower cover (A).
1. Remove the screw (B) from the driver's dashboard lower cover.
2. Pull out the bottom of the driver's dashboard lower cover to release the clips (C) and hooks (D).
3. Disconnect the VSA OFF switch connector (E), the cruise control switch connector (F), the in-car temperature sensor connector (G), and the air hose(H).
3. Install the cover in the reverse order of removal, and note these items:
- Make sure all connectors are plugged in properly, and the air hose is connected properly.
- Replace any damaged clips.
- Push the clips and hooks into place securely.