ATF Temperature Sensor Replacement
ATF Temperature Sensor Replacement1. Remove the splash shield.
2. Drain the automatic transmission fluid (ATF).
3. Disconnect the ATF temperature sensor connector (A), then remove the connector from the connector bracket (B).
4. Remove the harness clamp (C) from its bracket (D).
5. Remove the ATF temperature sensor.
6. Install a new O-ring (E) on the new ATF temperature sensor (F).
7. Install the ATF temperature sensor connector to the connector bracket, then connect the connector securely.
8. Install the harness clamp on its bracket.
9. Refill the transmission with the ATF.
10. Install the splash shield.