Park Pin Switch Test
Park Pin Switch Test1. Remove the shift lever assembly.
2. Disconnect the D3 switch/shift lock solenoid/park pin switch connector.
3. Move the shift lever into P, then check for continuity between D3 switch/shift lock solenoid/park pin switch connector terminals No. 1 and No. 2. There should be no continuity.
4. Move the shift lever out of P, and check for continuity between terminals No. 1 and No. 2
2. There should be continuity.
5. If the park pin switch is faulty, replace it.
6. Install the shift lever assembly.