Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Switch: Service and Repair
VTM-4 LOCK Switch Test/Replacement1. Remove the instrument panel.
2. Disconnect the 5P connector (A) from the VTM-4 LOCK switch (B), then remove the VTM-4 LOCK switch.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity check is not as specified, replace the bulbs (C) or the VTM-4 LOCK switch.