Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Rear Window Middle Glass Regulator
Rear Window Middle Glass Regulator ReplacementNOTE:
- Put on gloves to protect your hands.
- Take care not to bend or scratch the trim and panels.
1. Remove these items:
- Rear seat assembly
- C-pillar trim, both sides
- Rear seat belt lower anchor
- Rear seat side trim, both sides
- Subwoofer, for some models
- Rear panel insulator
2. Remove the rear window middle glass mounting bolts.
3. Disconnect the connector (A) from the regulator motor(B).
4. Remove the bolts (C, D), and detach the cable clips (E), then remove the regulator (F) and motor.
5. Apply multipurpose grease to the sliding surfaces of the regulator (A) where shown.
6. Install the regulator in the reverse order of removal, and note these items:
- Slide the glass right and (left to see if it moves freely without binding.
- Make sure the connector is plugged in properly.