Front Seat Frame Replacement - Passengers Seat (2-Door)

Front Seat Frame Replacement - Passenger's Seat

Special Tools Required
- KTC trim tool set SOJATP2014*

2-door Passenger's Seat

Calibrate the ODS unit after any of the these actions: Programming and Relearning

- Front passenger's seat replacement (including any seat components)

- Replacement of the seat weight sensors

- After a vehicle collision

NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- If the side airbag has deployed, replace the seat frame and related parts with new ones. Service and Repair

1. Remove the front seat. Front Seat Removal/Installation

2. Remove these items:
- Front seat-back cover/pad Front Seat-Back Cover Replacement (2-Door)

- Front seat cushion cover/pad Front Seat Cushion Cover Replacement (2-Door)

- Seat belt buckle Front Seat Belt Replacement (4-Door)

- ODS unit ODS Unit Replacement

- Side airbag Side Airbag Replacement

3. Slide the front seat frame rearward fully.

4. While releasing the tabs (A), disengage the hooks (B) from the rear outer seat weight sensor cover (C), then remove the front outer seat weight sensor cover (D).






5. Release the tabs (A), then remove the front inner seat weight sensor cover (B).






6. Slide the front seat frame forward fully, detach the clips, then remove the rear outer seat weight sensor cover (A) and the rear inner seat weight sensor cover (B) from the back of both seat tracks.











7. Remove the recline inner cover (A) and the center inner cover (B) from the seat frame (C).

8. Install the new seat frame in the reverse order of removal, and note these items:
- If the clips are damaged, replace them with new ones.

- Push the clips into place securely.