Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2009 >> CR-V 4WD L4-2.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Register >> Service and Repair >> Passengers Vent Panel Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Passengers Vent Panel Removal/Installation




Passenger's Vent Panel Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

- Take care not to scratch the dashboard and related parts.

1. Open the passenger's tray lid.

2. Remove the passenger's vent panel (A).
-1 From the tray lid opening, pull the left side edge of the panel out by hand.
-2 Pry the front bottom of the panel slightly you to detach the lower clips.






3. Pull the lower portion of the passenger's vent panel (A) partially out by hand. Detach the upper clips by pulling the middle and upper portions of the panel toward you.






4. If necessary, remove the screws, then remove the passenger's vent (A) from the passenger's vent panel (B).

5. Install the panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.





pro multis · About Operation CHARM