Rocker Arm Assembly and Camshaft Installation

Rocker Arm Assembly and Camshaft Installation

1. Reassemble the rocker arm assembly. Rocker Arm and Shaft Disassembly/Reassembly

2. Apply new engine oil to the camshaft lobes and journals.

3. Install the camshaft (A), the rocker arm assembly (B), the lost motion assembly (C) and the lost motion holder (D).






4. Apply new engine oil to the bolt threads and flange. Tighten each bolt two turns at a time in sequence.
Camshaft Holder/Lost Motion Holder, 8mm to 22 N-m (2.2 kgf-m, 16 lbf-ft)
Rocker Shaft, 8mm to 20 N-m (2.0 kgf-m, 16 lbf-ft)
Camshaft Holder, 6mm to 12 N-m (1.2 kgf-m, 8.7 lbf-ft)





5. Install the camshaft sprocket. Camshaft Sprocket Installation

6. Adjust the valve clearance. Adjustments