Electric Load Sensor: Service and Repair

ELD Replacement

1. Remove the PCM. Service and Repair

2. Remove the under-hood fuse/relay box. Under-Hood Fuse/Relay Box Removal and Installation

3. Remove the screw (A).






4. Turn the housing over, then remove the screw (A).






5. Turn the housing over again. Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box housing (C).
NOTE: Make sure the terminals (D) are not bent or damaged.






6. Remove the ELD (A).

7. Install the parts in the reverse order of removal.