Manufacturer Code Charts: 1202

Navigation System DTC Troubleshooting: 1202

DTC 1201: DVD High Temp

NOTE:

- Check the vehicle battery condition first.

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot The Navigation System (With Navigation)

- This code sets when the internal temperature of the navigation unit ECU rises above 158 °F (70 °C). The unit is designed to shut down to protect the navigation unit ECU. This could be caused by an inoperative navigation unit ECU fan or if the trunk temperature exceeds the maximum. Do the troubleshooting when the unit is within the allowable temperature range.

1. Check that the temperature is below 158 °F (70 °C) in the dash.

2. Clear the hard error code. How to Troubleshoot The Navigation System (With Navigation)

3. Turn the ignition switch to LOCK (0), and then back to ON (II).

4. Check for the hard error code. How to Troubleshoot The Navigation System (With Navigation)

Is DTC 1201 indicated?
YES - Replace the navigation unit. Service and Repair

NO - Intermittent failure, the system is OK at this time. If the unit repeatedly comes back with the DTC, replace the navigation unit. Service and Repair