Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Dimmer Switch: Service and Repair
Dash Lights Brightness Controller and Odometer Select/Reset Switch Test/Replacement
1. Remove the subdisplay visor Subdisplay Visor Removal/Installation and disconnect the connectors.
2. Remove the two screws and the dash lights brightness controller and odometer select/reset switch (A).
3. Check for continuity between the terminals in each switch position according the table.
4. If the continuity is not as specified, replace the bulbs (B) or the dash lights brightness controller and odometer select/reset switch.
5. Install the dash lights brightness controller and odometer select/reset switch in the reverse order of removal.
