Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Countershaft Reverse Selector Hub Installation (A/T)
Countershaft Reverse Selector Hub Installation
Special Tools Required
- Driver handle, 40 mm I.D. 07746-0030100
1. Install 1st gear, 2nd gear, 3rd gear, the 33.2 x 40 x 26 mm collar, the 29 mm cotters, and the 33 x 45 x 7.8 mm collar on the countershaft, and secure them with the snap ring.
2. Install the needle bearings and 4th-5th gear.
3. Slide the reverse selector hub (A) over the countershaft (B), then press it in place using the 40 mm I.D. driver handle and a press.
NOTE: Some reverse selector hubs are not press-fitted, and can be installed without using the special tool and a press.
