B2-Bx

SRS DTC Troubleshooting: B2-17, B2-8x, B2-9x, B2-Ax, B2-Bx (x can be 0 thru 9 or A thru F)

DTC B2-17, B2-8x, B2-9x, B2-Ax, B2-Bx ("x" can be 0 thru 9 or A thru F): Internal Failure of the Rear Safing Sensor

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information.

1. Clear the DTC memory.

2. Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator stay on, and is B2-17, B2-8x, B2-9x, B2-Ax, or B2-Bx indicated?
YES - Replace the rear safing sensor, then clear the DTC. If the DTC returns, replace the SRS unit.

NO - Intermittent failure, system is OK at this time. If another DTC is indicated, troubleshoot the DTC.