Dashboard Center Lower Cover Removal/Installation

Dashboard Center Lower Cover Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to scratch the dashboard or the related parts.

1. Except SC models: Remove the clips (A), and detach the clips (B), then remove the center rear cover (C).






2. SC model: Remove the clips, then remove the center rear cover (A).

3. Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.