Map Pocket: Service and Repair

Driver's Pocket Removal/Installation

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the dashboard or the related parts.

1. Remove the driver's dashboard lower cover. Drivers Dashboard Lower Cover Removal/Installation

2. From under the dash, push out the lock tabs (A) to release the cruise control main switch (B) ('07-08 models) and the VSA OFF switch (C), then remove the switches. Disconnect the connectors (D, E).

'07-08 models





'09 model





3. From under the dash, remove the screws (A, B) securing the driver's pocket (C).

4. While pulling out on the bottom edge of the dashboard (D), remove the pocket.

5. Install the pocket in the reverse order of removal, and make sure the switch connectors are plugged in properly.