Rear Seat Support Removal/Installation

Rear Seat Support Removal/Installation

1. Remove the seat support (A).
-1 Release the clips (B).
-2 Release the hooks (C), and detach the clip (D), then remove the outer support cover (E) and the inner support cover (F).
-3 Remove the rear seat belt buckle center anchor bolt (G).
-4 Remove the support bracket covers (H) from both sides.
-5 Remove the bolts (I).
-6 Release the support spring (J).






2. Install the seat support in the reverse order of removal, and note these items:
- Apply multipurpose grease to the moving parts (A) as indicated by the arrows.

- Apply medium strength liquid thread lock to the center anchor bolt before reinstallation.

- Make sure there are no twists or kinks in the seat belt buckle before reinstallation.

- When installing the inner support cover, slip the strap through the hole in the cover.