ECT Sensor 1 Replacement

ECT Sensor 1 Replacement

1. Remove the air cleaner. Service and Repair

2. Remove the EVAP canister purge valve. Service and Repair

3. Remove the under-hood fuse/relay box bolt, and move the assembly aside.

4. Drain the engine coolant. Service and Repair

5. Disconnect the ECT sensor 1 connector (A).

6. Remove ECT sensor 1 (B).

7. Install the parts in the reverse order of removal with a new O-ring (C) coated with clean engine oil, then refill the radiator with engine coolant. Service and Repair