3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement

1. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A) and the sealing washer (B).

2. Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer, and tighten the 3rd clutch transmission fluid pressure switch to the specified torque by turning the metal part, not the plastic part.

3. Check the connector for rust, dirt, or oil, and clean or repair if necessary. Then connect the connector securely.