Rear Differential Installation (4WD)

Rear Differential Installation

1. Install rear differential mount assembly A to the rear differential assembly (B).

2. Jack up the rear differential.






3. Install new set rings (A) into the groove of the rear differential inboard joint.






4. Insert the driveshafts (A) into the rear differential (B).

5. Lift the rear differential up into position, then push on both driveshafts to lock the set rings into place. Connect the breather tube (C).






6. Install the plates (A) and the rear differential mount assembly mounting bolts (B).






7. Install the rear differential damper (A) (M/T model), and install right and left rear differential mount brackets B.

8. Connect the No 2 propeller shaft onto the rear differential by aligning the reference mark.. Propeller Shaft Installation (4WD)

M/T model





A/T model





9. Install the tail pipe (A).

10. Refill the rear differential with the recommended fluid. Rear Differential Fluid Inspection and Replacement (4WD)

11. Test-drive the vehicle.