A/T Park Pin Switch Test

A/T Park Pin Switch Test

1. Remove the shift lever console trim. Shift Lever Trim Removal/Installation

2. Remove the shift lever mounting bolts (A).






3. Disconnect the park pin switch connector (A).

4. Move the shift lever to P and release the shift lever button, then check for continuity between connector terminals No. 1 and No. 2. There should be no continuity.

5. Move out of P or press the shift lever button while in P, and check for continuity between connector terminals No. 1 and No. 2. There should be continuity.

6. If the park pin switch is faulty, replace it.