Windshield Moulding / Trim: Service and Repair

Windshield Side Trim Replacement

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Put on gloves to protect your hands.

1. Pull the top edge on the windshield side trim (A) up to detach the hooks (B).






2. Pull the top edge of the trim (A) up, and hold it, then slide the trim rearward along the A-pillar to release the clips (B) from the retainers (C). The retainers will stay in the body. Take care not to scratch the other trim or the body.






3. Replace the any damaged clips (A) on the trim (B) or damaged retainers (C) on the body.











4. Hold the trim up, and insert the bottom edge of the trim into the hood hinge cover (A). Align the top edge of the trim with the front edge of the roof side front trim (B), and fit the clips (C) into the retainers (D), then push on the trim until the hooks (E) and clips snap into place.