B1105

DTC Troubleshooting: B1105

DTC B1105: Door Multiplex Control Unit Lost Communication with MICU (DOORSW Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for 6 seconds or more.

4. Check for DTCs with the HDS.

Is DTC B1105 indicated?
YES - Go to step 5.

NO - Intermittent failure. The system is OK at this time. Check for loose or poor connections.


5. Check for DTCs with the HDS.

Are DTCs B1057 and B1159 also indicated?
YES - Do the MICU input test. Multiplex Integrated Control System MICU Input Test

NO - Do the door multiplex control unit input test. Door Multiplex Control Unit Input Test