B1152

DTC Troubleshooting: B1152

DTC B1152: Gauge Control Module Internal Error (EEPROM Error)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for 6 seconds or more.

4. Check for DTCs with the HDS.

Is DTC B1152 indicated?
YES - Replace the gauge control module.

NO - Intermittent failure. The system is OK at this time. Check for loose or poor connections.