Rear Seat-Back Cover Replacement

Rear Seat-back Cover Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear the seams or damage the seat covers.

1. Remove the seat-back. Rear Seat Removal/Installation

2. Remove the armrest. Rear Seat Armrest Replacement

3. Release the hook strips (A) and the Velcro fasteners (B).






4. Pull back the edge of the seat-back cover (A), then release the hook strips (B, C).






5. Pinch the tabs on the ends of the head restraint guides (A) and remove them from the seat-back.






6. Pull back the edge of the seat-back cover (A) all the way around, and release the upholstery rings (B), then remove the seat-back cover.

7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips and upholstery rings.

- Replace any upholstery rings you removed with new ones. Install them with commercially available upholstery ring pliers.